C19常州某化工厂主车间结构设计

 2023-01-30 10:01

论文总字数:86910字

摘 要

本工程为常州某化工厂主车间结构设计。本建筑物主体结构采用框架结构,抗震设防烈度7度,抗震设防分组为一组。

本设计主要进行了结构方案中横向框架5轴框架的结构设计。在确定框架布局之后,先进行了层间荷载代表值的计算,接着利用顶点位移法求出自震周期,进而按底部剪力法计算水平地震荷载作用下大小,进而求出在水平荷载作用下的结构内力(弯矩、剪力、轴力)。内力计算考虑以下三种荷载作用,即水平地震荷载作用下的内力,竖向恒载作用下的内力,重力荷载设计值作用下的内力。在进行截面抗震设计时,柱按偏压构件计算,为保证延性框架要“强剪弱弯,强柱弱梁”设计原则,且满足构造要求。完成了基础选型,平面布置,内力分析和配筋及施工图绘制。还完成了平台板,梯段板,平台梁等构件的内力和配筋计算及施工图绘制。

关键词:框架结构;荷载计算;配筋;结构设计

C19 Structural Design of Main Workshop of a Chemical Plant in Changzhou

Abstract

This project is the structural design of the main workshop of a chemical plant in Changzhou. The main structure of this building adopts frame structure with seismic fortification intensity of 7 degrees, and seismic fortification is grouped into a group.

This design mainly carries out the structural design of the 5-axis frame of the transverse frame in the structural scheme. After determining the layout of the frame, the representative values of interstorey loads are calculated firstly, then the seismic period is calculated by the vertex displacement method, and then the magnitude of the horizontal seismic loads is calculated by the bottom shear method, and then the internal forces (bending moment, shear force and axial force) of the structure under the horizontal loads are obtained. The internal force calculation considers the following three kinds of loads: the internal force under the horizontal seismic load, the internal force under the vertical dead load and the internal force under the gravity load design value. In seismic design of cross-section, columns are calculated according to eccentric compression members. In order to ensure the ductile frame design principle of "strong shear, weak bending, strong column and weak beam", and meet the structural requirements. Foundation selection, plane layout, internal force analysis, reinforcement and construction drawing have been completed. The calculation of internal force and reinforcement of platform plate, step plate, platform beam and other components and the drawing of construction drawings have also been completed.

Key words: Frame Structure; Load Calculation; Reinforcement; Structural Design

目录

摘 要 Ⅰ

Abstract Ⅱ

第一章 引言 1

1.1选题背景和意义 1

1.2课题设计方案 1

第二章 工程概况和设计资料 2

2.1 工程名称 2

2.2 工程概况 2

2.3 建筑场地的工程地质资料 2

2.4 材料 3

2.5 设计依据 3

第三章 结构平面布置 5

3.1 结构方案 5

3.2 结构平面布置 5

3.3初选截面尺寸 5

第四章 荷载计算 7

4.1 荷载计算 7

第五章 横向框架在竖向荷载作用下的计算 9

5.1 楼板荷载布置 9

5.2 传至节点的集中荷载(包括纵向连续梁传来荷载和柱自重) 10

5.3 横向框架内力分析 15

第六章 地震作用下内力计算 30

6.1 重力荷载代表值计算 30

6.2 水平地震作用和位移计算 33

第七章 内力组合 40

7.1 控制界面 40

7.4 框架梁的最不利内力 44

第八章 梁截面设计 45

8.1框架横梁正截面设计 45

8.2框架横梁正截面设计 46

8.3 框架梁抗震截面设计 47

8.4 底层框架梁正截面配筋计算 48

8.5 底层框架梁斜截面设计 48

第九章 柱截面设计 50

9.1 框架柱非抗震截面设计 50

9.2 框架柱抗震截面设计 55

9.3 框架柱斜截面截面设计 59

第十章 基础 61

10.1 边柱柱下基础设计 61

10.2中柱下基础设计 64

第十一章 楼梯设计 68

11.1 标准层 68

11.2底层楼梯设计 71

结束语 75

致 谢 76

参考文献 77

第一章 引言

1.1选题背景和意义

剩余内容已隐藏,请支付后下载全文,论文总字数:86910字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;