基于一级A排放标准的农村生活污水成套组合工艺设计

 2022-04-19 06:04

论文总字数:30540字

摘 要

本毕业设计主要是针对太湖流域一级保护区内某自然村的污水处理进行设计。设计水量为100m3/d,要求出水水质达到《城乡污水处理厂污染物排放标准》(GB18918-2002)一级A标准。本着“低耗、高效”的原则,既能有效去除污染物,又能降低运行成本,采用前端生物处理,后端生态处理的污水处理形式。经过对目前在农村生活污水处理中较为流行的几种污水处理技术进行简要分析与比选,结合当地实际状况,最终确定了“格栅及集水井—缺氧好氧(A/O)组合生化池—竖流式沉淀池—预留消毒池—复合型人工湿地”的工艺路线。其中A/O组合生化池、竖流式沉淀池和消毒池采用一体化设计,以减少占地面积;复合型人工湿地采用垂直潜流人工湿地在前,水平潜流人工湿地在后的组合形式,湿地植物和基质选用常见的芦苇 煤渣组合。

关键词:农村生活污水,100m3/d,一体化A/O工艺,复合型人工湿地

ABSTRACT

The graduation design is mainly designed for the sewage treatment of a natural village in the first-level protection zone of Taihu Lake Basin. The designed water volume is 100m3/d, and the effluent water quality is required to meet the Grade A standard of the Pollutant Discharge Standard for Urban and Rural Wastewater Treatment Plants (GB18918-2002). Based on the principle of “low consumption and high efficiency”, it can effectively remove pollutants and reduce operating costs. It adopts front-end biological treatment and back-end ecological treatment of sewage treatment. After a brief analysis and comparison of several sewage treatment technologies that are currently popular in rural domestic sewage treatment, combined with the actual situation in the local area, the final process route of “Grid and collection wells—Anoxic and aerobic (A/O) combined biochemical pool—vertical flow sedimentation tank—reserved disinfection tank—composite constructed wetland” was determined. Among them, A/O combined biochemical pool, vertical flow sedimentation tank and disinfection tank adopt integrated design to reduce floor space; composite artificial wetland adopts vertical submerged artificial wetland in front, horizontal submerged artificial wetland in later combination, wetland Plants and substrates use a common combination of reed cinder.

KEY WORDS: rural domestic sewage, 100m3/d, integrated A/O process, composite artificial wetland

目 录

摘 要 I

ABSTRACT II

第一章 绪论 1

1.1农村生活污水的现状 1

1.2农村生活污水主要处理技术 2

1.2.1生物处理 2

1.2.2生态处理 2

1.2.3生物—生态联用处理 2

1.3小结 3

第二章 设计依据 4

2.1水量水质资料 4

2.1.1处理水量 4

2.1.2进出水水质 4

2.1.3进出水位标高 4

2.1.4设计中需要考虑的问题 4

2.2标准与规范 5

2.3相关参考书 5

第三章 工艺选择 7

3.1生物处理工艺选择 7

3.1.1工艺比选 7

3.1.2工艺确定 8

3.2生态处理工艺选择 8

3.2.1工艺比选 8

3.2.2工艺确定 9

3.2.3人工湿地类型确定 9

3.2.4湿地基质的比选与确定 9

3.2.5湿地植物的比选与确定 10

3.3消毒工艺选择 10

3.4工艺路线确定 10

第四章 工艺设计 12

4.1去除效率预测 12

4.2单体设计 12

4.2.1格栅及集水井 12

4.2.2A/O组合生化池 14

4.2.3二次沉淀池 23

4.2.4预留消毒池(清水池) 25

4.2.5复合型人工湿地 25

4.3平面布置 29

4.4高程布置 29

参考文献 31

致 谢 33

第一章 绪论

1.1农村生活污水的现状

近年来,由于未得到足够的重视和有效的收集,农村生活污水的直接排放使得其对环境和人身健康的威胁日趋加重,成为影响水环境乃至生态环境安全的重要因素之一[1]。统计显示,全国一半以上的水污染是由农业源污染引起的[2]。与已经比较健全的城市生活污水管网和处理设施相比,农村生活污水的处理起步较晚,尚未全面展开,仍存在处理技术和方法不完善、基础设施缺乏等问题。全国农村大约每年生产80亿吨左右的生活污水量[3],这些污水中常见的主要是厨房和洗浴用水等,它们中绝大部分在未经处理的情况下直接排入河流、湖泊等水体,其结果就是导致河流、湖泊等水体出现水华、蓝藻等富营养化现象,并且这些现象日趋严重。受不同的生活习惯和经济水平等方面的影响,各农村所排放生活污水的水量、水质也有着非常大的差异[4]

目前,农村生活污水主要呈现以下几个特点:

剩余内容已隐藏,请支付后下载全文,论文总字数:30540字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;