安徽某乡生活污水处理厂设计

 2022-03-22 08:03

论文总字数:31139字

摘 要

Abstract I

第一章 设计任务书 1

1.1概述 1

1.1.1设计题目 1

1.1.2设计背景 1

1.1.3设计内容 1

1.1.4设计依据 1

1.1.5工程建设必要性 2

1.2地区概况 4

1.2.1地质地貌 4

1.2.2气候条件 4

1.2.3社会经济 4

1.3设计规模及设计水质 5

1.3.1工程服务范围 5

1.3.2工程规模 5

1.3.3污水厂厂址选择 5

1.3.4进出水水质及处理程度 5

第二章 设计计算书 6

2.1工艺方案论证 6

2.1.1农村污水特征 6

2.1.2工艺选择原则 6

2.1.3进水水质分析 7

2.1.4出水水质及处理程度 7

2.1.5工艺流程 8

2.1.6工艺流程图 13

2.2单体构筑物设计 14

2.2.1设计规模 14

2.2.2细格栅及调节池 14

2.2.3改良A-A-O组合生化池 16

2.2.4滤罐和紫外消毒设备基础 25

2.2.5出水流量井 27

2.2.6进出水仪表间 27

2.2.7综合车间 27

2.2.8主要设备材料清单 28

2.3平面布置及竖向设计 33

2.3.1平面布置 33

2.3.2厂区道路、给水排水及通讯 33

2.3.3竖向设计 33

2.3.4厂区绿化 34

2.3.5主要技术指标 34

2.4投资估算 36

2.4.1编制说明 36

2.4.2工程投资估算表 37

第三章 设计图纸 41

…………………

参考文献 42

致 谢 43

摘 要

本工程为安徽某乡生活污水处理厂设计,为新建小型污水厂,设计水量为:近期400m3/d,远期1000m3/d。设计出水水质要求达到一级A标准。该镇规划在镇区北侧设置一座污水处理厂,规划用地性质为二类居住用地,现状为荒地,尾水受纳水体为现状水渠。

本工程采用预处理——二级处理——深度处理的模式。预处理包括细格栅和调节池,二者合建;二级处理的主体工艺是改良A-A-O工艺和平流式沉淀池,合建为组合生化池;深度处理由滤罐和紫外消毒组成,均采用一体化设备。污泥每7天外运一次,至中心站处理,最终处置方式为焚烧。

为了工程质量和处理效果能得到保证,本工程中的污水和污泥处理设备、仪表、自控的关键设备都采用国内一线品牌。

工程总投资448.72万元,其中:工程建设费用365.38万元,工程建设其他费用67.50万元,基本预备费15.84万元。

关键词:污水处理厂设计,小型污水厂,改良A-A-O工艺

Abstract

This project is a domestic sewage treatment plant design in Anhui Province. It is a new small sewage plant with a designed water volume of 400m3/d in the near future and 1000m3/d in the long term. Effluent quality should meet the level A standard. The sewage treatment plant is set up on the north side of the township. The land is the second type of residential and it is a wasteland now. The effluent goes to the current water channel.

This project uses a pre-processing, secondary processing, and deep processing mode. The pretreatment includes a fine grid and a regulating tank, and they are combined; the main process of the secondary treatment is the modified A-A-O technology and a flat flow sedimentation tank, which is combined into a combined biochemical pool; the deep treatment consists of a canister and ultraviolet disinfection, both of which are integrated equipment. The sludge is transported every 7 days to the central station for treatment. The final disposal method is incineration.

The key process equipment, instruments and self-controlled equipment used in sewage and sludge treatment should be productions of the domestic first-line brands. The control system mainly adopts the method of decentralized control and centralized management. The control of the main equipment adopts the combination of local manual control and remote automatic control.

The total investment of the project is 4,478,200 yuan, the project construction cost is 3,653,800 yuan, the other construction cost is 675,500 yuan, and the basic reserve fee is 158,400 yuan.

KEY WORDS:sewage treatment design, small sewage treatment plant, modified A-A-O technology

第一章 设计任务书

1.1概述

1.1.1设计题目

设计题目:安徽某乡生活污水处理厂设计

1.1.2设计背景

该镇属于安徽省铜陵市义安区,位于长江中下游南岸,属于亚热带季风气候,全年四季分明,雨量适中,无霜期长,冬夏温差较大,降水年际变化明显。该镇的森林资源和矿产资源较丰富,农作物以油菜和水稻为主,属于以建材工业、特色农产品加工、生态旅游为主的工旅型城镇,现长住人口数为0.5万人,远期规划人口数为1.1万人。该镇目前还没有污水收集管网和污水处理设备,规划在镇北设置一座污水处理厂,规划用地性质为二类居住用地,现状为荒地,尾水受纳水体为现状水渠。

1.1.3设计内容

本工程为乡镇生活污水处理工程设计,建设项目为生活污水处理厂1座,接纳污水主要为乡镇的生活污水。污水厂处理规模为近期400m3/d,远期1000m3/d,污水厂设计出水水质应执行《城镇污水处理厂污染物排放标准》(GB18918-2002)中的一级A标准,设计内容包括污水厂平面设计、高程设计、构筑物工艺施工图设计以及投资概算。

1.1.4设计依据

(1)毕业设计任务书

(2)《地表水环境质量标准》(GB 3838-2002)

剩余内容已隐藏,请支付后下载全文,论文总字数:31139字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;