办公楼工程量清单编制和A企业投标报价

 2023-03-16 09:03

论文总字数:69741字

摘 要

随着我国建筑市场竞争的日益激烈,加上施工企业数量的迅速膨胀,由此造成了一定程度上的供需失衡,形成了买方市场。施工企业为了在建筑市场中赢得市场份额,在清单计价模式自主报价的招标方式下,不惜以低价取得项目,但由于自身管理水平跟不上,造成项目微利或无利,甚至亏本。因此,工程造价的合理确定和有效控制造价(成本)成为当前施工企业工程管理的重中之重。

本次毕业设计课题是本三层整体现浇框架结构的办公楼,包括施工组织设计,工程量清单编制,投标报价,小论文等内容。建筑面积为814.95㎡,建筑结构的安全等级为二级,建筑高度为11.7m。室内外高差-0.300。

设计的任务是工程量清单的编制,施工组织设计的编制和企业的投标报价,在计算时首先应熟悉和搞清楚设计的要求和规范,以工程所在地进行定额项目划分及其工程量计算规则为依据,根据现场实际情况出发,考虑合理的施工方案,一步一步计算工程量,不要缺项漏项。最终完成整个设计任务。

关键词:工程量清单;报价

The construction of the project quantity list and the A enterprise tender offer

Abstract

With the increasingly fierce competition in the construction market, coupled with the rapid expansion of the number of construction enterprises, resulting in a certain degree of imbalance between supply and demand, the formation of a buyer"s market. Construction enterprises in order to win the market share in the construction market, bidding quotation list valuation mode in the independent, do not hesitate to get low-cost projects, but because of their own management level can not keep up, causing the meager profit or no profit or even a loss. Therefore, the reasonable determination of project cost and effective control of cost (cost) has become the top priority of the current construction enterprise project management.

This graduation project topic is the three floor of the whole cast in place frame structure office building, including the construction organization design, engineering quantity list preparation, tender offer, small paper and so on. Construction area of 814.95 square meters, the safety class of the building structure is two, building height of 11.7m. Indoor and outdoor height difference -0.300.

The design task is the preparation of bill of quantities, construction organization design and preparation of the bidding enterprises, when calculating the first clear and should be familiar with the design requirements and specifications, to the location of the project of project of quota division and calculation rules as the basis, on the basis of the actual situation, considering the reasonable construction scheme. Step by step, engineering quantity calculation, not lack of scholars. Complete the design task.

Keywords: Bill of quantities;offer

目 录

摘 要 I

Abstract II

第一部分 毕业设计综述 1

第一章 工程概况 2

第二章 毕业设计任务 3

第二部分 办公楼工程量清单编制 9

第三部分 A企业投标报价 26

第一章 投标函及投标函附录 28

第二章 法定代表人身份证明(略) 29

第三章 授权委托书(略) 29

第四章 联合体协议书(略) 29

第五章 投标保证金 30

第六章 已标价工程量清单 31

第七章 施工组织设计 73

第八章 项目管理机构(略) 79

第九章 资格审查资料(略) 79

第四部分 浅谈投标报价策略与技巧 83

结 束 语 87

谢 辞 88

参 考 文 献 89

第一部分

毕业设计综述

第一章 工程概况

本工程是三层整体现浇框架结构的办公楼,地理位置优越,交通便利。建筑结构的安全等级为二级,设计使用年限为50年。抗震设防烈度为7度,框架抗震等级为三级。该场地土地属抗震一般地段,地基基础设计安全等级为丙类,耐火等级为2级,室内正常环境为一类,建筑面积为814.95㎡,建筑高度为11.7m。室内外高差-0.300。本工程结构设计软件采用PKPM。砌体施工质量控制等级别B级。本工程全部尺寸均以毫米为单位。

混凝土结构环境类别为:基础2a类,0.000以上外墙、顶板、外露构件为2a类,室内正常环境为一类。钢筋锚固长度、搭接长度均不少于《混凝土设计规范》GB50010-2010的要求。梁、住的箍筋末端应做成135°弯钩,弯钩平直长度不小于箍筋直径的10倍,施工下料时应放足尺寸。

剩余内容已隐藏,请支付后下载全文,论文总字数:69741字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;