352省道2标段施工图设计

 2022-12-23 10:12

论文总字数:14708字

摘 要

本论文主要介绍了352省道2标段的设计。主要完成道路平面设计、纵断面设计、横断面设计、路基设计、路面结构设计、排水设计和路基防护设计。该路段所经地区为平原区,根据设计年限内交通量的预测情况,将路线设计为设计速度为 80km/h 的双向四车道的一级公路,路线全长 7847.306 米,路基宽为 26 米。路线共设有 4 个平曲线,7 个竖曲线。在平面选线过程中,JD1圆曲线半径设为1500米,缓和曲线长170米,JD2为2100 米,缓和曲线长230米,JD3为2000 米,缓和曲线长230米,JD4为1000 米,缓和曲线长170米。竖曲线半径一般是圆曲线半径的 25 到 65倍,竖曲线极限长为 350米。在横断面设计中:车道宽设为 3.75 米,中央分隔带2 米,硬路肩 3 米,土路肩 0.75 米,右侧路缘带 0.5 米。路面排水采用梯形边沟进行排水,保证路基路面的水稳定性。该路段,设计的各项指标均满足规范的要求。

关键词平面设计;纵断面设计;横断面设计;路基设计;路面结构设计;排水设计

A highway design in section 2 of Provincial Road 352

Abstract

This paper mainly introduces the design of section 2 of s352. The main design of the road plane, vertical section design, cross section design, roadbed design, pavement structure design and drainage design. The road through the region for the plain areas, according to the forecast of traffic volume in design period, the route design for the design speed is 80km/h the two-way four lane highway, the route length of 7847.306 meters, 26 meters wide road. There are 4 horizontal curves and 7 vertical curves. In the process of line selection, the radius of circular curve is set to 1500 meters, and the easement curve is about 170 meters long. The radius of the vertical curve is generally 25 to 65 times the radius of the circular curve, the vertical curve length of the limit value of 350 meters. Cross section design requirements: lane width of 3.75 meters, the central divider with a distance of 2 meters, hard shoulder of 3 meters, the earth shoulder of 0.75 meters, the right side of the road with a total of 0.5 meters. The drainage of the road surface is carried out by trapezoidal side ditch to ensure the water stability of roadbed and pavement. The design of the sections of the indicators meet the specifications.

Keywords: Graphic design; Longitudinal design; Cross section design;Roadbed design; Pavement structure design; Drainage design

目 录

摘要 I

Abstract II

第一章 绪论 1

1.1 设计总体说明 1

1.2 沿线水文地质情况 1

1.3 工程概况 1

第二章 平面设计 2

2.1 选线 2

2.2 平面线形设计 3

2.3 提交成果 6

第三章 纵断面设计 7

3.1 技术指标规定 7

3.2 纵断面设计的一般原则 7

3.3 平、纵线形组合设计原则 7

3.4 平、纵线形组合的基本要求 7

3.5 设计成果 8

3.6 提交成果 8

第四章 横断面设计 9

4.1 技术指标规定 9

4.2 横断面设计的一般原则 9

4.3 横断面设计步骤 10

4.4 路基土石方计算和调配 10

4.5 提交成果 11

第五章 路基设计 12

5.1 路基设计原则 12

5.2 填料的选择及压实标准 12

5.3 提交成果 13

第六章 路面结构设计 14

6.1 概述 14

6.2 沥青路面组合设计原则 14

6.3 路面结构及层次划分 14

6.4 提交成果 14

第七章 排水设计 15

7.1 排水的目的和意义 15

7.2 排水设计的一般原则 15

7.3 路面排水设计规范 15

7.4 提交成果 16

第八章 路基防护工程设计 17

8.1 一般路段防护 17

8.2 沿河、塘路段防护 17

8.3 提交成果 18

致 谢 19

参考文献(References) 20

附录A 21

附录B 22

附录C 23

附录D 24

附录E 25

附录F 26

附录G 27

  1. 设计总体说明
    1. 概述

根据江苏省交通强省重要战略规划,为了保障省道畅通,缓解城市交通压力,完善江苏省各城市节点路网结构,拓展城市发展空间,促进江苏省经济发展,解决目前城市交通和过境交通相互干扰的问题,规划建设了352省道作为江苏省省级干线公路网的重要组成部分,本设计说明书是关于352省道2标段的设计说明与设计图纸。

1.2 沿线水文地质情况

剩余内容已隐藏,请支付后下载全文,论文总字数:14708字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;