宁马高速NM-SG2标保通一道路路基施工技术

 2022-10-18 09:10

论文总字数:14643字

摘 要

由于绕城公路地基土复杂,往土层中打桩成为本标段施工的关键问题及难点,而保通一路段不同断面层采用水泥搅拌桩和预应力PC管桩两种施工工艺进行施工。路基施工是最为重要的环节,一方面路基施工的好坏对于路面的质量起到了至关重要的作用,另一方面路基施工质量的好坏对于路面的使用寿命有着重要的联系。宏观方面来说则会影响到行人的安全,因此,加强对路基施工极为重要。由于本标段属于绕城公路改扩建工程,同时施工现场处于绕城公路边上。保通一道路段交通量大且日平均车流量达 12 万次,其次施工区域贴近居民区,如何在施工的同时一方面保证了不影响车流量的通行,另一方面又不直接影响附近居民的生活。所以,保证工程进度和质量的同时也要做好文明施工的工作。

关键词:水泥搅拌桩和预应力PC管桩施工工艺;路基施工;文明施工

Construction technology of road subgrade of Ningma High speed NM-SG2 standard factoring

Abstract

Because of the complexity of the foundation soil around the city highway, piling into the soil layer becomes the key problem and difficulty in the construction of this standard section The construction

technology of cement mixing pile and prestressed PC pipe pile is carried out in different section layers of the 

one section. Subgrade Construction is the most important link, On the one hand, the quality of subgrade

 construction plays an important role in the mass of pavement, On the other hand, the quality of subgrade 

construction has an important relationship with the service life of pavement.On the macro side, it can affect the safety of pedestrians,Therefore, it is very important to strengthen the construction of subgrade. Because this 

standard paragraph belongs to the road reconstruction and expansion project, at the same time the construction site is located on the edge of the road around the city.The traffic volume of a section of the road is large and

 the average daily traffic flow up to 120,000 times, Second, the construction area is close to residential areas.

How to ensure the traffic without affecting the traffic flow while the construction is on the one hand, On the 

other hand, it does not directly affect the lives of nearby residents.Therefore, to ensure the progress and quality of the project, but also to do a good job of civilized construction.

Keywords: Construction technology of cement mixing pile and prestressed PC pipe Pile;Subgrade Construction ;Civilized Construction

目录

摘要 I

Abstract II

第一章 引 言 1

1.1背景与意义 1

1.1.1 背景 1

1.1.2 意义 1

1.2 研究方法 1

第二章 施工准备 3

2.1组织准备 3

2.2物质准备 3

2.3.保通一施工场地准备 3

2.3.1用地划界明细和拆迁周围障碍物 3

2.3.2清理场地 3

2.3.3保通一施工现场排水 4

2.4施工期间交通组织 4

2.4.1交通组织原则 4

2.4.2保通策略 4

2.4.3保通道路施工注意事项 4

第三章 软基设计方法及控制标准 6

3.1软基处理原则 6

3.2水泥土双向搅拌桩施工方法及注意事项 6

3.2.1 总说明 6

3.2.2 施工准备工作 6

3.2.3 双向搅拌桩施工工艺参数的确定 6

3.2.4 搅拌桩施工步骤 7

3.2.5 双搅拌桩施工前后注意事项 8

3.3 预应力PC管桩施工方法及注意事项 9

3.3.1 施工准备 9

3.3.2 PC管桩施工工艺 9

3.3.3 PC管桩质量控制 12

3.3.4 PC管桩施工注意事项 13

3.3.5 路基填筑和预压 13

第四章 施工现场安全管理 15

4.1 文明施工制度 15

4.2 环境保护措施 15

4.2.1 水资源环境保护 15

4.2.2 大气环境及扬尘的防治 15

4.2.3 固体废弃物处理 17

4.3 现场安全设施投入 17

第五章 结束语 20

致 谢 21

参考文献 22

第一章 引 言

1.1背景与意义

1.1.1 背景

在人类社会的发展过程中,城市化是一个非常重要的阶段。随着城市化进程的加快,国内外的城镇居民汽车的持有量迅速的增长,于是导致旧路的交通已经不能负荷现有的承载量[1]。为此,为了更大程度的满足日益增长的车流量需求,便需要想办法将原有的公路结构进行重新调整。通过扩宽路面或者在主线旁增设几条保通道路以此来缓解巨大的车流量。与郊区的改扩建公路不同的是,类似这种公路改扩建工程一般出现在市区周围,所以需要考虑的因素和修建的技术难度大幅度提高。

油坊桥项目属于城市化公路改扩建的一个例子,除了部分路段采用半幅施工外,为了最大程度缓解交通压力,还增设了五条保通道路。其中保通一道路段交通量大且日平均车流量达 12 万次,因此施工前需要设置施工道口并且做好施工道口的管理工作,且保通一道路段施工区域采用围挡全封闭措施。绕城公路上除了有庞大的车流量,且周围有居民居住区,做好降尘、降噪工作是本标段施工中需注意到的问题。尤其是扬尘管控工作,为减少施工作业对周边环境影响,有效预防扬尘污染,提高现场文明施工管理水平是本标段施工的关键问题和难点。保通一道路起止桩号:PC 管桩(2K0 109.730~2K0 200.000);双搅桩:2K0 200.000~2K0 400.000)。由于绕城公路地基土复杂,往土层中打桩成为本标段施工的关键问题及难点。除此之外,由于本标段紧邻居民区,施工区域地表下有管线设施,地表有杆线、电塔等设施。如何做好这些设施的迁移交接工作也是本标段施工的重难点。

剩余内容已隐藏,请支付后下载全文,论文总字数:14643字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;