深圳港赤湾港区集装箱码头工程

 2022-06-30 10:06

论文总字数:68954字

摘 要

赤湾港区位于深圳港的西部港区,位于珠江入海口的东岸前缘,地理条件优越,距离深圳市区仅25公里。深圳港赤湾港区周边有群山环绕,珠江口岸外有浅滩密布,为赤湾港区提供了理想的天然屏障。港口内水深良好,港内水域开阔,各项配套设施完善,适合多种大型货物运输船舶的停靠和转运,是我国珠三角地带推动经济发展的综合多式联运码头。

赤湾港区8#泊位集装箱码头工程主要停靠船型为6万吨级PANAN AX型基桩集装箱船和5万吨级的散货船。本文涉设计拟定了全直桩高桩码头和有叉桩与斜桩支承的高桩梁板码头共两种方案。从码头的施工期与使用期两个阶段以及码头钢筋混凝土工程量的综合对比,最终选定本码头的设计结构为全直桩高桩梁板式码头。

本码头将横梁与纵梁设计为等高连接的形式,面板使用叠合板,依据工程地基的地质情况,采用全直桩的结构形式,将基桩打入地基的持力土层,充分使用基桩的抗弯能力。码头排架间距为10米,每榀排架为五跨梁,提高了码头的稳定性和承载力。

本码头面板结构使用单向板结构,面板支撑在纵梁上,纵梁搭载在横梁上,纵梁为刚性支承连续梁,横梁为弹性支撑连续梁,本码头使用影响线法对梁板结构进行计算。

设计完成了码头断面图、立面图和平面图的设计,完成了码头梁板安装图的设计,完成了码头面板配筋图与轨道梁配筋图的设计。
关键词:赤湾港区;梁板式高桩码头;结构设计

Abstract

Chiwan port area is located in the western port district of shenzhen port. It is located in the eastern front of the pearl river estuary. Shenzhen port chiwan port area is surrounded by mountains, and the pearl river port is dotted with shoals of shoals, providing an ideal natural barrier for chiwan port area. Good depth of water in port, port waters is open, perfect supporting facilities, suitable for a variety of large cargo ships docked and transport, is the pearl river delta area to promote the economic development of our country's comprehensive intermodal terminal.

The no. 8 berth container terminal project in chiwan port area mainly calls at the 60,000 ton PANAN AX type pile container ship and 50,000 ton bulk cargo ship. In this paper, a total of two schemes are proposed for the design of full straight pile high pile wharf and high pile beam and slab wharf with fork pile and inclined pile. From the two stages of the construction and use of the wharf and the comprehensive comparison of the amount of reinforced concrete in the wharf, the design structure of the wharf was finally selected as the slab wharf with full straight pile and high pile.

This dock will beam and girder design for the form of contour connection, panel using composite plate, on the basis of the geological condition of engineering foundation, adopts the straight pile structure form, the soil will pile into the foundation strength, fully use the pile bending capacity. The distance between the wharfs is 10 meters, and each truss is five beams, which improves the stability and bearing capacity of the wharf.

The dock panel structure using one-way slab structure, panel support on longitudinal beam, the longitudinal beam carrying on beams, longitudinal beam of rigid support continuous beam, beam and elastic support continuous beam, the terminal use of beam slab structure influence line method to calculate.

The design completed the design of the wharf sectional drawing, elevation drawing and planar drawing, completed the design of the wharf beam plate installation drawing, and completed the design of the wharf panel reinforcement drawing and track beam reinforcement drawing.

KEY WORDS: chiwan port area; Beam and plate piled wharf; The structure design

目 录

摘 要 Ⅰ

Abstract Ⅱ

第一章 项目背景 1

1.1 项目背景 1

1.2 工程环境 2

第二章 港址选择 4

2.1 工程地理位置 4

2.2 地质地貌条件 5

2.2.1 地质状况 5

2.2.2 气象条件 6

2.2.3 水文特征 7

2.2.4 地震 8

第三章 码头设计基础资料 9

3.1 码头泊位设计 9

3.2 码头荷载 10

3.2.1 码头自重 10

3.2.2 船舶荷载 10

3.2.3 使用荷载 14

3.3 工艺流程 15

第四章 码头总平面布置 16

4.1 总平面布置原则 16

4.2 码头高程设计 16

4.2.1 码头前沿高程 16

4.2.2 码头底面标高 17

4.3 总平面布置方案 18

4.3.1 码头计算宽度 18

4.3.2 码头航道设计 18

4.4 码头结构形式拟定 19

4.4.1 重力式码头 19

4.4.2 板桩式码头 19

4.4.3 高桩码头 20

4.4.4 高桩码头型式特点分析 20

4.5 码头结构方案拟定 22

4.5.1 技术设计方案比选 22

4.5.2 推荐使用方案 25

第五章 面板设计 26

5.1 设计条件 26

5.1.1 计算原则 26

5.1.2 主要尺寸 26

5.1.3 荷载组合 27

5.2 计算跨度 27

5.3 面板荷载 28

5.4 作用效应分析 29

5.4.1 施工期(短暂状况) 29

5.4.2 使用期(持久状况) 30

5.4.3 作用效应组合 35

5.5 截面设计 37

5.5.1 计算依据 37

5.5.2 承载力极限状态计算 38

5.5.3 持久状况正常使用极限状态计算 39

5.5.4 裂缝宽度验算 41

第六章 纵梁设计 43

6.1 设计条件 43

6.2 计算跨度 43

6.3 荷载计算 44

6.3.1 施工期(短暂状况) 44

6.3.2 使用期(持久状况) 44

6.4 作用效应分析 45

6.4.1 施工期(短暂状况) 45

6.4.2 使用期(持久状况) 46

6.4.3 作用效应组合 50

6.5 配筋及抗裂验算 51

6.5.1 计算依据 51

6.5.2 配筋计算 52

剩余内容已隐藏,请支付后下载全文,论文总字数:68954字

您需要先支付 80元 才能查看全部内容!立即支付

该课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找;